Please Baidu searchHengxing Heat Press Machinery Co., LtdKeywords find us!

Industry news

What should I pay attention to when choosing a heat press machine?

Word:[Big][Middle][Small] Mobile page qrcode 2019-12-6     Viewed:    

The core part of the heat press machine is a heating plate, so you should pay attention to it when choosing a heat press machine.

The upper and lower plates should be made of aluminum, and the heating tube is cast inside the aluminum plate. For example, the upper plate is slotted with aluminum plate and then attached with a heating pipe, which will cause unnecessary energy loss, and will have the disadvantages of slow temperature rise and large constant temperature difference.

If the lower plate is made of iron or other materials, it will be easily deformed and aged if it is used under high temperature and high pressure for a long time.

According to the area of the heating plate, there are weight standards on the upper and lower plates. If it is too light and thin, the heating plate will easily deform and affect the use. Generally speaking, the greater the weight, the more reliable the performance.

After pressing the upper plate of the heat press machine, it should be absolutely parallel to the lower plate. To test whether the upper and lower plates are tightly engaged, you can put a piece of hard paper or other sheet-like materials with tough materials at the four corners, and then press the handle down. After the upper and lower plates are locked, the hard paper is pulled outward. , You can know whether the upper and lower plates are flat and the machine is qualified.

Go Back
Print
0557-7359688
Browse mobile stations