Please Baidu searchHengxing Heat Press Machinery Co., LtdKeywords find us!

Corporate Information

Classification and maintenance of heat press machine

Word:[Big][Middle][Small] QR Code 2018-9-18     Viewed:    

1. Pull up the straight pressure handle to fully open the heating plate. Plug in the power, turn on the power switch, the indicator light is on; Note: Due to the high power of the machine, the whole machine must have a suitable and reliable protective ground wire! !! !!

2. Temperature adjustment: Press “” or “-” key to set the temperature, press “” key to increase the temperature setting value, and press “-” key to decrease the temperature setting value.

3. Adjust the left timer knob to the appropriate time to 10 seconds (the length of time depends on different materials);

4. When the temperature reaches the set value, the machine will automatically enter the constant temperature state;

5. Place the transfer material such as clothes and it on the printing platform, and then stack the pictures to be transferred, and press down the pressure handle; Note: The pressure should not be too large, otherwise the pressure handle will be deformed! Adjust the pressure beforehand.

6. When the time is up, the buzzer sounds. At this time, lift the pressure handle, remove the transferee such as clothes, and tear off the bottom paper.

7. The temperature of the baked metal plate is generally 170-200 ° C and the time is 20-40 seconds; the temperature of the baked porcelain plate is generally 200-220 ° C and the time is 120-150 seconds; the temperature of the baked fabric is generally 120-140 ° C. Time is 5-10 seconds.

Go Back
Browse mobile stations